| |
|
 |
 |
|
| |
| Single Point
Miniature Load Cell |
| Single
point miniature load cell Model SS - 610 |
| Model
Information | Dimension | Photograph |
|
|
| |
| Model
Information : |
Single point miniature load cell FEATURES:
o Single Point
Capability with
minimum Off-centre error
o Low profile Design
o Capacity as low 300 gmf. Full Scale
o Moisture Proof Sealing
o Inbuilt Protecting Bracket
Single
point miniature load cell APPLICATIONS:
o Precision Jewelery Scales
o Small Bagging Machine
o Thread Tension Measurements
DESCRIPTION:
Single
point miniature load cell Model 61000 is a Strain Gauge Based low
Profile bending beam Miniature
Load Cell and is ideal
for Table Top & Jewelery Scales. It is
Designed for low eccentric load sensitivity. It is Provided
with mechanical over load & under load protection mechanism.
|
|
| |
PERFORMANCE
SPECIFICATION
|
| Standard
capacity(Kgf.) |
300,400,500,750 |
| (Tf.) |
1,1.5,2 |
| Excitation Voltage |
10VDC- Maximum 15VDC |
| Nominal Output |
1.6 mV/V |
| Non Linearity |
<± 0.025%FSO(Full
Scale Output) |
| Hysteresis |
<± 0.02%FSO |
| Non Repeatability |
<± 0.01%FSO |
| Creep(30 Minutes) |
<± 0.03%Fso |
| Zero Balance |
± 5.0%FSO |
| Input Resistance |
420 ± 15
Ohms |
| Output Resistance |
350 ± 3 Ohms |
| Insulation Resistance |
>1000Mega Ohms at
50 VDC |
| Safe Overload |
150%of Rated Capacity |
| Ultimate Overload |
250%of Rated Capacity |
| Temperature |
0-60°c |
| Compensated
Range |
|
| Temperature Effect
on Output |
<0.0015%FSO/°C |
| Temperature Effect
on Zero |
<0.0020%FSO/°C |
| Platter size |
120 mm dia |
| Eccentric Load Effect |
<0.02% of FSO at
1/3 rated load placed theedge of the specified
size platter |
| Deflection |
<0.5mm at FSO |
| Construction |
Aluminium Alloy |
| Mechanical
Proction |
Provided with bracket to protect from over
load, under load & side load effects |
|
| |
|
|
|
| |
|
